//IMAGE PVS Putty Soft

IMAGE PVS Putty Soft

A- Silicone putty soft – fast setting  Nanotechnology.

New generation, very high viscosity, two component A-Silicone with extremely long life. Recommended for all imression techniques. It can be used in both; two stage (double impression) and single stage. Improved by application of nano-particles in fillers.

 Advantages

  • Flows ideally due to nano-particles
  • Hydrophillic
  • No bubbles
  • Excellent reproduction of details
  • Very good mechanical properties
  • Low linear shrinkage
  • No release of toxic substances during and after curing
  • High resistance to inorganic chemicals and UV rays
  • Good release properties with organic resins and gypsum

 Technical Data

  • Classification ADA 19                                                                    High type I
  • Classification ISO 4823                                                                 Type 0
  • Colour                                                                                               Yellow
  • Dosage Base:Catalyst                                                                   1:1
  • Mixing time                                                                                     30sec
  • Working time                                                                                  30sec
  • Time in mouth                                                                                1.30
  • Total time                                                                                        2.30
  • Shore A Hardness at 24h (ASTM D 2240/C)                          approx.60
  • Specific Gravity 23 C                                                                      approx.1,55
  • Linear Dimensional Change                                                           <-0,2%
  • Strain in compression                                                                    3-5%
  • Recovery for deformation (ISO 4823)                                            approx. 99,8%

Warning

Do not mix A-Silicones wearing rubber gloves.

The sulphur inhibits curing through chemical reaction.

Package: Base 350ml / 550gr + Catalyst 350ml / 550gr

Description

A- Silicone putty soft – fast setting  Nanotechnology.

New generation, very high viscosity, two component A-Silicone with extremely long life. Recommended for all imression techniques. It can be used in both; two stage (double impression) and single stage. Improved by application of nano-particles in fillers.

 Advantages

  • Flows ideally due to nano-particles
  • Hydrophillic
  • No bubbles
  • Excellent reproduction of details
  • Very good mechanical properties
  • Low linear shrinkage
  • No release of toxic substances during and after curing
  • High resistance to inorganic chemicals and UV rays
  • Good release properties with organic resins and gypsum

 Technical Data

  • Classification ADA 19                                                                    High type I
  • Classification ISO 4823                                                                 Type 0
  • Colour                                                                                               Yellow
  • Dosage Base:Catalyst                                                                   1:1
  • Mixing time                                                                                     30sec
  • Working time                                                                                  30sec
  • Time in mouth                                                                                1.30
  • Total time                                                                                        2.30
  • Shore A Hardness at 24h (ASTM D 2240/C)                          approx.60
  • Specific Gravity 23 C                                                                      approx.1,55
  • Linear Dimensional Change                                                           <-0,2%
  • Strain in compression                                                                    3-5%
  • Recovery for deformation (ISO 4823)                                            approx. 99,8%

Warning

Do not mix A-Silicones wearing rubber gloves.

The sulphur inhibits curing through chemical reaction.

Package: Base 350ml / 550gr + Catalyst 350ml / 550gr