-
A - Silicone Light Body Fast setting New generation, very low viscosity, two component, hydrophilic A - Silicone with extremely long life. Specially formulated for two stage technique (double impression). Advantages
- High tear strength
- Excellent elastic recovery
- High dimensional stability
- Mixing ratio 1:1
- Hydrophilic
- Thixotropic
- Excellent reproduction of details
- Very good mechanical properties
- Low linear shrinkage
- No release of toxic substances during and after curing
- High resistance to inorganic chemicals and UV rays
- Good release properties with organic resins and gypsum
- Classification ADA 19 Low type I
- Classification ISO 4823 Type 3
- Colour Orange
- Dosage Base:Catalyst 1:1
- Mixing time automatic mixing
- Working time 1.30 min.
- Time in mouth 1.30min.
- Total time 3 min.
- Shore A Hardness at 24h (ASTM D 2240/C) approx.53
- Specific Gravity 23 C approx.1,37
- Linear Dimensional Change <-0,2%
- Strain in compression 3-5%
- Recovery for deformation (ISO 4823) approx. 99,8%
-
Organopolysiloxane Dental Impression material 900ml New type condensation silicone Type o, high viscosity (ADA) No 19) Extended researches in our laboratories as well as avant-garde technology resulted in manufacturing this exceptional product. It is a new type of condensation silicone with excellent characteristics of initial fluidity. Apart from Dentplus, no other type of silicone presently available in market, is able to retain such a high fluidity during working time. The final impression being so hard and dense prevents the possibility of deformation achieving at the same time the greatest possible detail using the double impression technique.
-
- Mucous compression is reduced during insertion in mouth
- During the double impression technique, Dentplus can be used as individual tray.
- Suitable for provisional applications, bites and study models
- Perfect elasticity
- Minimal deformation
- Excellent final hardness
- Working time from the beginning of mixing 1min.15sec
- Time in mouth 1min.15sec
- Consistence in mm (ISO) 33
- Breaking resistance 100%
- Resistance to the traction (on cm2) 18kg
- Resistance to the tearing (on cm2) 2,7kg
- Linear retraction after 1 hour 0,080
- Linear retraction after 24 hours 0.215
-
-
Description: Red Color Thermoplastic impression material in the form of round plates cakes to take primary impression in edentulous cases. Indications: * Impression of crowns or bridge. * impression of partial denture. * Cavity impression of facing , inlay, onlays etc. Benefits: * Extremely smooth. * Accurate and easy to mix. * Dimensional stability. * Models can be poured up to 2 weeks after impression taking. * Hydrophilic properties. * High Elasticity- tear resistant. Packaging: 5 Round Cakes, 200g in mono pack
-
A-Silicone for Bite Registration (95 Shore- A hardness) New generation, two component, thixotropic, medium consistency A-Silicone material for bite registration with extremely long life. For direct application onto teeth. Advantages
- It can be safely removed from patient's mouth without risk of fracture or breaking.
- It does not get brittle if there is need to reposition.
- It can be finished with scissors, scalpel or bur.
- Very fast setting.
- Final hardness 95 Shore-A.
- Thixotropic.
- Bubble free.
- Easy trim.
- Flowable and stable for accurate imressions.
- Classification ADA 19 Medium type I
- Classification ISO 4823 Type 2
- Colour Blue
- Dosage Base:Catalyst 1:1
- Mixing time automatic mixing
- Working time 45 min.
- Time in mouth 1min.
- Total time 1.45 min.
- Shore A Hardness at 24h (ASTM D 2240/C) approx.95
- Specific Gravity 23 C approx.1,7
- Linear Dimensional Change <-0,2%
- Strain in compression 3-5%
- Recovery for deformation (ISO 4823) 99,8%
-
A - Silicone Light Body Fast setting New generation, very low viscosity, two component, hydrophilic A - Silicone with extremely long life. Specially formulated for two stage technique (double impression). Advantages
- High tear strength
- Excellent elastic recovery
- High dimensional stability
- Mixing ratio 1:1
- Hydrophilic
- Thixotropic
- Excellent reproduction of details
- Very good mechanical properties
- Low linear shrinkage
- No release of toxic substances during and after curing
- High resistance to inorganic chemicals and UV rays
- Good release properties with organic resins and gypsum
- Classification ADA 19 Low type I
- Classification ISO 4823 Type 3
- Colour Orange
- Dosage Base:Catalyst 1:1
- Mixing time automatic mixing
- Working time 1.30 min.
- Time in mouth 1.30min.
- Total time 3 min.
- Shore A Hardness at 24h (ASTM D 2240/C) approx.53
- Specific Gravity 23 C approx.1,37
- Linear Dimensional Change <-0,2%
- Strain in compression 3-5%
- Recovery for deformation (ISO 4823) 99,8%
-
A - Silicone for gingival mask. New generation, two component, special laboratory A- Silicone for preparation of gingival masks on implant prosthetic models. Type hard. Advantages
- High dimensional stability
- Easy trim
- Great precision
- Suitable for implant prosthetics
- High final hardness
- Detailed reproduction
- Dosage Base:Catalyst 1:1
- Working time 2min
- Total time 10min
- Shore A hardness after 1h 72
- Linear dimensional change <0,3
- Recovery from deformation approx. 99,8%
-
A - Silicone for gingival mask. New generation, two component, special laboratory A- Silicone for preparation of flexible gingival masks on fixed prosthesis. Type elastic. Advantages
- High dimensional stability
- Easy trim
- Great precision
- Suitable for implant prosthetics
- Highly elastic
- Detailed reproduction
- For direct and indirect technique
- Perfect aesthetic results
- Dosage Base:Catalyst 1:1
- Working time 2min
- Total time 10min
- Shore A hardness after 1h 45
- Linear dimensional change <0,3
- Recovery from deformation approx. 99,8%
-
A - Silicone Medium Consistency New generation, two component, hydrophilic, medium viscosity A-Silicone precision impression material with extremely long life. One step. Monophase material to be used both on tray and around the preparation for excellent direct reproduction. Ideal for implant impressions. Advantages
- High tear strength
- Excellent elastic recovery
- High dimensional stability
- Mixing ratio 1:1
- Hydrophilic
- Thixotropic
- Excellent reproduction of details
- Very good mechanical properties
- Low linear shrinkage
- No release of toxic substances during and after curing
- High resistance to inorganic chemicals and UV rays
- Good release properties with organic resins and gypsum
- Classification ADA 19 Medium type I
- Classification ISO 4823 Type 2
- Colour Pink
- Dosage Base:Catalyst 1:1
- Mixing time automatic mixing
- Working time 2.30 min.
- Time in mouth 1.30min.
- Total time 4 min.
- Shore A Hardness at 24h (ASTM D 2240/C) 62
- Specific Gravity 23 C 1,45
- Linear Dimensional Change <-0,2%
- Strain in compression 3-5%
- Recovery for deformation (ISO 4823) 99,8%
-
A - Silicone Light Body Fast setting New generation, very low viscosity, two component, hydrophilic A - Silicone with extremely long life. Specially formulated for two stage technique (double impression). Advantages
- High tear strength
- Excellent elastic recovery
- High dimensional stability
- Mixing ratio 1:1
- Hydrophilic
- Thixotropic
- Excellent reproduction of details
- Very good mechanical properties
- Low linear shrinkage
- No release of toxic substances during and after curing
- High resistance to inorganic chemicals and UV rays
- Good release properties with organic resins and gypsum
- Classification ADA 19 Low type I
- Classification ISO 4823 Type 3
- Colour Green
- Dosage Base:Catalyst 1:1
- Mixing time automatic mixing
- Working time 2 min.
- Time in mouth 2.30min.
- Total time 4.30 min.
- Shore A Hardness at 24h (ASTM D 2240/C) approx.53
- Specific Gravity 23 C approx.1,37
- Linear Dimensional Change <-0,2%
- Strain in compression 3-5%
- Recovery for deformation (ISO 4823) 99,8%
-
A- Silicone putty soft - fast setting Nanotechnology. New generation, very high viscosity, two component A-Silicone with extremely long life. Recommended for all imression techniques. It can be used in both; two stage (double impression) and single stage. Improved by application of nano-particles in fillers. Advantages
- Flows ideally due to nano-particles
- Hydrophillic
- No bubbles
- Excellent reproduction of details
- Very good mechanical properties
- Low linear shrinkage
- No release of toxic substances during and after curing
- High resistance to inorganic chemicals and UV rays
- Good release properties with organic resins and gypsum
- Classification ADA 19 High type I
- Classification ISO 4823 Type 0
- Colour Yellow
- Dosage Base:Catalyst 1:1
- Mixing time 30sec
- Working time 30sec
- Time in mouth 1.30
- Total time 2.30
- Shore A Hardness at 24h (ASTM D 2240/C) approx.60
- Specific Gravity 23 C approx.1,55
- Linear Dimensional Change <-0,2%
- Strain in compression 3-5%
- Recovery for deformation (ISO 4823) approx. 99,8%
-
Vinylpolysiloxane transparent impression material of medium consistency. Specially formulated for matrix. Direct application onto teeth. Can be used as
- a) Matrix when preparing standard & light-cured temporary crowns & bridges
- b) Transmission band for orthodontic brackets in the direct technique
- c) Occlusal template for light-curing posterior composite restorations
Classification ADA19 Medium bodied consistency Classification ISO 4823 Type 2 Mixing time Automatic mixing Working time 30 sec Time in mouth 1.30 min. Total time 2 min. Shore A hardness at 24h 72 Linear dimensional change < 0,2% Strain in compression 3-5% Recovery from deformation 99,8%
